Set Up Or Change Report Preferences; Create, View, Save And Print Reports - Abbott FreeStyle InsuLinx Owner's Booklet

Set up or Change Report Preferences

The FreeStyle Auto-Assist software allows you to set the following report preferences:
•
Report set
•
Time frame
•
Glucose Targets
(includes hypoglycaemia threshold)
IMPORTANT: Work with your health care professional to understand your report data.
Note: Your blood glucose targets and hypoglycaemia threshold preferences will only be used in the
reports and will not change any meter settings.
Note to health care professionals: These preferences will be stored on your computer and will be
used when creating reports from any meter.
Step
Go to the Reports tab. If this is the first time you are creating reports, click
1
to be guided through the report preferences setup.
Create Reports
If you wish to change your report preferences, click Report Preferences on the left
2
side of the screen. Use the submenus to change your report preferences.
53
•
Auto-save options
•
Print colour
•
Quick print
Action

Create, View, Save and Print Reports

Step
1 Go to the Reports tab. On the left side of the screen, click Create Reports.
Note: You can change report settings from this screen by clicking Edit on the setting
you wish to change. Click Done to save changes. These changes are not stored in Report
Preferences.
2 If you would like to preview the reports, click View on Screen.
Use the arrows to view the next/previous report page.
To save the report as a PDF, click Save.
Note: The Adobe Acrobat Reader program must be installed on your computer to
save files in Adobe Acrobat PDF format. Go to www.Adobe.com for instructions on
downloading this program free over the Internet.
Click Print to print your selected reports.
Action
54