Install The Freestyle Auto-Assist Software - Abbott FreeStyle InsuLinx Owner's Booklet

Install the FreeStyle Auto-Assist Software

Note: FreeStyle Auto-Assist is compatible with both PC and Mac operating systems.
Step
1
With your meter off, use the provided micro USB cable to connect your meter's USB port
to your computer. If you do not have the micro USB cable provided with the meter, you
may use other micro USB cables.
2 The software will start automatically for installation or use.
Follow the InstallShield Wizard prompts. Click Next after each entry.
Note that you may be asked to supply an administrator password.
3 Click Finish or Close once installation is complete.
The program will automatically launch whenever you connect the meter to your
computer.
WARNING: To avoid the possibility of electric shock, never perform a blood glucose test while the
meter is connected to the computer.
43
Action
If the installation does not automatically start, follow the steps below to install the software.
Windows Computer Systems (includes Windows 7, Windows Vista and Windows XP)
Step
1
Locate "My Computer" on your desktop. Double-click "My Computer" to open.
2
Locate the "FreeStyle Auto-Assist" icon. Double-click on this icon to open.
3
Locate the "Windows" folder. Double-click on this folder to open.
4
Locate the "Disk1" folder. Double-click on this folder to open.
5
Locate the "Setup application" icon. Double-click on this icon to begin the installation.
Macintosh Computer Systems (OS X, includes Leopard, Snow Leopard and Lion)
Step
In the Finder window, select the Device called "FreeStyle Auto-Assist" in the Devices
1
section.
2
Within the FreeStyle Auto-Assist Device, select "Mac".
3
Double-click on the "FreeStyle Auto-Assist.pkg" file.
For additional questions, please contact Customer Service.
Action
Action
44