Setting Up Your Optium Xceed Meter; Buttons To Use; Setup Options; Measurement Units - Abbott Optimum Xceed User Manual

CHAPTER 2
Setting Up Your Optium
Xceed Meter

Buttons to Use

Mode Button
Forward Button
Back Button

Setup Options

Set Beeper

If the beeper is set ON, it will beep when:
•
The calibrator is fully inserted
•
The test countdown starts
•
The test countdown finishes
Set Time, Set Date
Important: Please check that the correct time and date
is set before you use the meter for the first time. This will
help you keep records of when you monitor and will help
you and your healthcare professional make informed
decisions about your care. You must set the time and
date to review averages.
You may need to reset the time and date:
•
After you replace the battery.
•
When you travel between time zones or when the time
zone you are in changes.
In "Set Date", you set the year, month, and day.
Set Time Format
In "Set Time Format", you choose how the time shows on
the meter's display window.
ART13613-001_Rev-D-Guide.indd 10-11
Questions? Call
Customer Support:
UK: 0500 467 466
Ireland: 1800 776633
7
Set Date Format
In "Set Date Format", you choose how the month and
day show on the meter's display window.

Measurement Units

Blood glucose measurement units are factory-set in mg/dL
or mmol/L.
Blood β-Ketone measurement units are in mmol/L only.
How to Set the Beeper, Date, Time, &
View Measurement Units
Before you start, please note:
Hold" means that you press the button in
for at least 2 seconds. "Press and Release"
means that you press the button and let it
go quickly.
Press and Hold the button to turn the
meter off and save your settings at any
time. The meter automatically turns off after
30 seconds of no action.
If you like the setting that you see on your
meter and do not want to change it, Press
and Release the button to move to the
next setup option.
Set Beeper
The means the beeper is ON.
The means the beeper is OFF.
"Press and
Beeper ON
Beeper OFF
8
2/19/09 2:04:40 PM