Your Test Results - Abbott FreeStyle InsuLinx Owner's Booklet

4
Perform the test.
a. Insert a test strip and close the test strip vial.
b. Use your lancing device to obtain a blood drop.
c. Apply blood to the test strip as shown in the picture.
d. The meter will beep once to let you know that you have applied
enough blood.
Notes:
•
Once you start applying blood, you have 60 seconds to fill the
test strip on the same side of the test strip only. The time you
have left is shown as a countdown on the screen.
•
The time that the meter takes to display a result depends on
your blood glucose level. The higher your blood glucose level,
the longer it takes to get a result.
•
The meter turns off after 2 minutes of inactivity. Remove and
reinsert the unused test strip to restart the meter.
11
5
View the test result.
a. A butterfly will appear on the screen while you wait for
07:30
your result. The meter will beep twice when your result is
5.
mmol ready.
8
L
b. Remove and correctly discard the test strip and lancet.
Contact your health care professional regarding local
waste disposal requirements.
Refer to the Your Test Results section to learn how to
understand and mark your test results.
Note: Your result is now stored in your logbook.
IMPORTANT: After performing a blood glucose test, wash
your hands and the test site with soap and water. Thoroughly
dry your hands and the test site.
12