Brightness,.Contrast,.Saturation,.Hue,.Sharpness.and.noise.reduction; Overscan; Input.select; Resync - Digital Projection M-Vision Cine 3D series Operating Manual

Digital Projection
M-Vision Cine 3D series
Brightness, Contrast, Saturation, Hue, Sharpness and Noise Reduction
•
Adjust.the.sliders.for.these.settings.

Overscan

•
Choose.from.Off,.Crop.or.Zoom.
Input Select
•
Choose.which.input.source.to.display.

Resync

•
Press. ENTER/SELECT .to.force.the.projector.to.re-synchronise.with.the.current.input.signal.

3D Settings

•
Press. .to.open.the.3D.settings.sub-menu.
ENTER/SELECT
•
Set. .to. .or. .
3D Enable On Off
•
Set. .to.suit.the.configuration.of.the.3D.input.signal.
3D Type
•
Set. .to. ,.if.you.are.using.3D.glasses.that.can.utilise.the.DLP.Link®.signal.embedded.in.the.image.
DLP Link On
•
If.the.3D.images.are.displayed.in.the.wrong.order,.set.
Rev A August 2011
2. A TOUR OF THE MENUS
L-R Swap .to. Swap .
Operating Guide
Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
Overscan is used to compensate
for noisy or badly defined image
edges, by either:
- cropping the edges from the image
or
- increasing the size of the image, to
force the edges off-screen.
Main Menu
3D Settings
D video is not possible with all
inputs. See the Connection Guide
for more information.
3D Type can be set only when
3D Enable is Off .
and can be set
DLP Link L-R Swap
only when 3D Enable is On .
Page 8