Control Menu; Keys.1.To.5; Trigger.1.And.2; Auto-Source - Digital Projection M-Vision Cine 3D series Operating Manual

Digital Projection
M-Vision Cine 3D series

Control Menu

Keys 1 to 5
•
The. .to. ..keys.on.the.remote.control.can.each.be.programmed.to.switch.to.one.of.the.input.sources.
Trigger 1 and 2
•
Choose.from. ,.
Screen Aspect Ratio

Auto-Source

•
When.this.is.set.to. On ,.the.projector.will.search.for.an.alternative.input.source.when.the.current.input.source.is.disconnected
•
When.this.is.set.to. Off ,.the.projector.will.show.a.'blank'.screen.when.the.current.input.source.is.disconnected.
Rev A August 2011
.or. ,.to.determine.what.will.cause.each.Trigger output.to.activate.
RS232
2. A TOUR OF THE MENUS Operating Guide
Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
The Trigger outputs can be
used to automatically control the
screen or screen shuttering. See
the Connection Guide for more
information.
To set what a 'blank' screen looks
like, use the Blank Screen setting
in the System menu .
Page 12