Prodigy
Instrucciones importantes sobre seguridad
Lea esta información antes de utilizar su medidor autocodificado
Prodigy
. Siempre se deben tomar las siguientes precauciones
®
básicas de seguridad.
• Si el dispositivo se utiliza en o cerca de niños, personas
discapacitadas o inválidas, se necesita rigurosa supervisión.
• Use el dispositivo sólo para el uso al que está destinado y que
se describe en este manual.
• No utilice las tiras de prueba y las soluciones de control que no
son suministradas por el fabricante.
• No utilice el dispositivo si no funciona correctamente o si ha
sufrido algún daño.
• Antes de utilizar cualquier producto para probar la glucosa en la
sangre, lea detenidamente todas las instrucciones y practique
la prueba. Efectúe todas las verificaciones de control de calidad
como se indica y consulte con un profesional de atención
médica especializado en diabetes.
Advertencia: Mantenga el vial con la tira de prueba lejos de
los niños; la tapa del vial y las tiras de prueba pueden implicar
un posible riesgo de asfixia. No mastique ni trague una tira de
prueba. Si esto sucede, busque atención médica de inmediato.
Prodigy
Diabetes Care
®
Medidor parlante Manual del usuario
4
www.prodigymeter.com
Need help?
Do you have a question about the AutoCode and is the answer not in the manual?
Questions and answers
After ‘’please apply blood into the test strip’’ it shut immediately
The Prodigy AutoCode meter may shut off immediately after applying blood to the test strip if the test strip was not inserted correctly or if there was an issue with filling the strip properly. If the test strip is not in place when blood is applied, the meter will not function correctly. Ensure the strip is inserted with the chip side up before applying blood. If the issue persists, a new test strip may be needed.
This answer is automatically generated
Does any of your meters allow them to be sync to a computer?
Yes, Prodigy AutoCode meters allow syncing to a computer using a USB cable. When connected properly, “USb” will appear on the meter display, indicating successful communication with the PC.
This answer is automatically generated
I changed the batteries. Turned on. Placed a test strip and it shuts down