Layered Print (Cmyklclm Metallic Silver) - Roland VS-540i Manual

3-2 Print Job Setting : Equipped with White & Silver
Layered Print (CMYKLcLm Metallic Silver)
This section describes how to perform the layered print with the metallic silver ink and CMYKLcLm ink using
the CMYKLcLm ink as background.
 P. 18, "Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)"
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYKLcLm ink is designated.
 P. 12, "2-3 Creating Printing Data"
(Image of printing method)
The metallic silver ink and the CMYKLcLm ink are separated into the differ-
ent layers and printed in that order. (CMYKLcLm ink  Metallic silver ink)
Procedure

Make sure that you have finished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( P. 9, "Chapter 2 Getting Ready").

30
Chapter 3 Printing
VS-640i_USE2_EN_R1.indb 30
CMYKLcLm
Metallic Silver
Double-click .
"Queue A Properties" window appears.
The printed
image is to be
seen from this
side (the oppo-
site side of the
printed surface
of the finished
results).
Media
2013/07/23 19:00:27