Bosch D9412GV2 User Manual page 2

D9412GV2/D7412GV2
During the development of the GV2
Series Control Panels, some D5200
Handler version numbers were
skipped.
The following version numbers were
not released.
GV2MAIN v1.01
RADXUSR1 v1.05
RADXUSR2 v1.04
RADXPNTS v1.07
RADXSKED v1.03
GV2AUX v1.01
RADXAXS v1.05
Table 2: Supporting Literature for
D9412GV2/ D7412GV2 with
Firmware Version 7.08 and
Later
Document Name
D9412GV2/D7412GV2
Program Entry Guide
D9412GV2/D7412GV2
Program Record Sheet
D9412GV2/D7412GV2
Operation and Installation
Guide
D9412GV2/D7412GV2
Approved Applications
Compliance Guide
Older revisions have alphabetic revision
identifiers (for example, F01U003636B) and do
not provide information that supports version
7.05 and later firmware.
F01U003637-06
Part Number*
F01U003636-03
F01U003635-03
F01U003641-02
F01U003639-02
D9412GV2/D7412GV2 Release Notes for Version 7.09
Use Remote Programming Software
(RPS) version 5.7 and later with this
software version.
To acquire an update for your D5200
Programmer, call the Bosch Security
Systems, Inc. Handler Update System,
toll-free, at (800) 657-4584. Make a
separate phone call for each handler.
Use an analog telephone line with the
D5200. The D5200 dials only pulses.
Refer to Section 10 Updating Handlers
in the D5200 Programming Manual
(P/N: 74-06176-000-B) for details on
updating handlers.
Table 3: ROM Kit Part Numbers
Control Panel Model
D9412GV2
D7412GV2
When upgrading from GV2 Series
Control Panel Firmware v7.03 or
older, verify all associated prompts
against the compliance table in the
D9412GV2/D7412GV2 Program Entry
Guide (P/N: F01U003636) to ensure
compliance with the ANSI SIA CP-01
False Alarm Reduction Standard.
Page 2 © 201313 Bosch Security Systems, Inc.
Part Number
R20-9412V2-ROM
R20-7412V2-ROM