Replacing Your Locomotive's Lamps - Lionel SD-9 Diesel Locomotive Owner's Manual

Maintaining and servicing your locomotive

Replacing your locomotive's lamps

Y our locomotive is illuminated by two
12-volt lamps. One illuminates the rear
lights and the other illuminates the front
lights and cab interior. During the course of
normal operation, they may require
replacement.
Start by separating the plastic body shell;
remove the four cab mounting screws (see
Figure 4 on page 17). Carefully lift the shell
away from the frame. Take care with the
various wiring assemblies connected to the
shell.
Figure 6. Lamp replacement
Press AUX2 to make sure that the lamps were not accidentally turned off.
Note!
The roof-mounted flashing strobe light (Lionel part no. 610-8205-009) is located
Note!
inside the cab. Because of the complicated connection, we recommend that you
have your Authorized Lionel Service Center perform this service.
Locate the assembly containing the
expired lamp. It's held in position by a
retaining bracket. Carefully remove the
lamp assembly from the bracket, then gently
pull the expired lamp from its socket.
Replace the expired lamp with Lionel part
no. 600-8352-311, available from your
authorized Lionel Service Center or Lionel
Service. (For more information, see
page 20.) Reinstall the shell.
Lionel part no. 600-8352-311
19