Cab-1 Numeric Keypad Commands For Your Locomotive - Lionel SD-9 Diesel Locomotive Owner's Manual

TrainMaster Command operations

CAB-1 numeric keypad commands for your locomotive

W hen you press AUX1 on your CAB-1, you turn the numeric
keypad into ten command buttons. The keypad lets you control
extra command features (until you press any top-row button like SW,
ACC, RTE, TR, or ENG). RailSounds sounds in bold italic.
0 Stops and resets the locomotive. Resets
the locomotive's direction to
FORWARD. Resets RailSounds to
automatic RPM operation. Horn
blows. RPM's return to
automatic.
1 Raises the volume of RailSounds.
Sound volume increases.
2 CrewTalk is the sound of unintel-
ligible walkie-talkie communication.
3 Raises the RailSounds RPM's level.
Starts up RailSounds. RPM's
increase. Start-up sequence
commences.
4 Lowers the volume of RailSounds.
Sound volume decreases.
5 Activates the RailSounds shutdown
sequence. Just like the real thing, your
locomotive's RPM's must be at idle
for shutdown to occur. Press 6
repeatedly to lower the RPM's until
they won't descend further. Your
locomotive is now at idle. Press 5 to
initiate the shutdown sequence and
listen for the CrewTalk sound.
CrewTalk sounds, Diesel
shutdown commences.
Remember, the horn, bell, and RPM's
will not sound until you restart
RailSounds by pressing 3.
6 Lowers RailSounds RPM level.
RPM's decrease.
7 TowerCom is an audible two-part
announcement that includes that
engine's road number and/or name.
Pressing 7 the first time triggers a
"hold for clearance" announcement.
Press 7 again, and a "clear for
departure" message plays. There is a
four second delay in this function.
8 Turns off strobe light.
Air-release sounds.
9 Turns on strobe light.
Air-release sounds.
12
AUX1
START-UP
CREW
TALK
RPM
VOLUME
SHUT
DOWN
STROBE
TOWER
OFF ON
COM
ENGINE
RESET
DIESEL
S