Commodore 128 System Manual page 403

Scroll up
Scroll down
Enable bell (by control-G)
Disable bell
Set cursor to non-flashing mode
Set cursor to flashing mode
Set Bottom of screen window at cursor position
Set top of screen window at cursor position
Swap 40/80 column display output device
The following ESCape sequences are valid on an 80-column screen only
(See Section 8 for information on using an 80-column screen.)
Change to underlined cursor
Change to block cursor
Set screen to reverse video
Return screen to normal (non reverse video) state
NOTE: (40)...40 column screen only
(80)...80 column screen only
ESC V
ESC W
ESC G
ESC H
ESC E
ESC F
ESC B
ESC T
ESC X
ESC U
ESC S
ESC R
ESC N
1-5