Error Messages - Prodigy Autocode Owner's Manual

PRODIGY AutoCode® Blood Glucose Meter
Message What it means
"HI" appears when your result is
above the measurement limit, which
is higher than 600 mg/dL (33.3
mmol/L). You should immediately
consult your healthcare professional.
Error
Message Description
What it means: Appears when the
batteries cannot provide enough
power for a test.
Action: Replace the battery
immediately.
What it means: Appears when
inserting a used test strip.
Action: Test with a new test strip. If
the problem persists, please contact
Customer Care at 1.800.243.2636.
Owner's Manual
PRODIGY AutoCode® Blood Glucose Meter
Error
Message
Only the most common error messages are listed.
If your meter displays an error message that is not
listed, please contact Prodigy Customer Care at
1.800.243.2636.
58
Description
What it means: Appears when the
temperature is out of the system
operating range (50°F–104° or
10°C–40°C).
Action: Repeat the test after the
meter and test strip are within the
operating temperature range.
What it means: Insufficient blood
sample.
Action: Insert a new test strip.
Owner's Manual
59