Speaking Function; Setup Steps - Prodigy Autocode Owner's Manual

PRODIGY AutoCode® Blood Glucose Meter

Speaking Function

The Prodigy AutoCode
each step of your testing procedure.
When does the
meter speak?
When the meter is
turned on.
When room temperature
is outside operating range;
which is
50°F–104°F (10°C–40°C)
When the meter is ready
to test ( appears on display).
When the test is completed
(the result appears on the
display).
When you turn off the meter.
When a used test strip is
inserted.
When blood is applied to
the test strip.
Owner's Manual
meter talks you through
®
What does the
meter say?
Your Prodigy meter is on.
®
Please wait. Please insert
the test strip.
Temperature is
out of range.
.
Please apply blood into
the test strip.
Blood glucose (number)
milligrams per deciliter/
millimoles per liter.
Goodbye.
Test strip has been used.
Testing.
PRODIGY AutoCode® Blood Glucose Meter

Setup Steps

The Prodigy AutoCode
settings that may need to be adjusted before using
the meter. You should check the time and date
each time the batteries are replaced.
STEP 1: Insert the Batteries
Open the battery cover located on the backside
of the meter. Insert two (2) AAA Alkaline batteries
and align them properly. The meter will turn on
and enter Setting Mode.
STEP 2: Enter Setting Mode
If your meter is off, press the "SET" button located
in the battery compartment. The meter is now in
the setting mode.
Voice Speaks: "Your Prodigy
Please wait. Setting mode. English."
STEP 3: Select Language
The language option appears first with "L-1" on
the LCD. By default, "L-1" indicates the default
language (English); "L-2" indicates the second
language (Spanish); "L-3" indicates the third
language (French); and "L-4" indicates the fourth
22
meter has several different
®
meter is on.
®
Owner's Manual
23