Running Your Firecar Set In The Trainmaster Command Environment; Cab-1 Commands For Your Firecar Set - Lionel FireCarwith Training/Support car Owner's Manual

Running your Firecar set in the TrainMaster Command environment

Example address Locomotive #1
PowerMasters set to CMD or traditional
power supplies ON FULL
Press ENG
Press 1 (the ID#)
Throttle up/press any command button

CAB-1 commands for your Firecar set

F R
IRECAR SET AILSOUNDS EFFECTS
IN BOLD ITALIC
Activates keypad
(see page 10).
Turn the THROT-
TLE to the right to
accelerate, left to
decelerate.
Press HALT to shut
down all Power-
Master electrical out-
put on your railroad.
Stops all Command-
equipped Lionels in
operation.
Y
our Command-equipped
Firecar set comes factory-pro-
grammed with an ID# of "1." To get
your Firecar set locomotive in
action, set PowerMasters to CMD
or set all power supplies on full.
Press ENG and "1" on CAB-1. Turn
the throttle or press any command
button; your Firecar set locomotive
is ready for Command operations.
Press WSTL/HRN to acti-
vate the Firecar set horn,
release it to discontinue.
H
ORN DIESEL HORN SOUND
Press BELL once to activate
the bell, again to discontin-
ue. D
IESEL MECHANICAL BELL SOUND
Press DIR—the locomotive
decelerates to a complete
stop; turn the throttle up, and
the locomotive will accelerate
in the new, opposite direc-
tion. T
HERE IS NO NEUTRAL
. D -
STATE IESEL AIR RELEASE SOUND
Press and hold BOOST for
extra power. Release BOOST
and return to the Firecar set's
previous speed.
Press and hold BRAKE to
slow down or stop. Release
BRAKE and return to the
previous speed. S
.
SOUNDS
.
.
.
QUEALING BRAKE
9
9