Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lionel Ford Auto Dealership
Summary of Contents for Lionel Ford Auto Dealership
- Page 1 72-4113-250 9/03 Rev. 1 Lionel Ford Auto Dealership Owner’s Manual © Ford...
- Page 2 • Three die-cast cars • 12 hand-painted figures • Two green wires • Owner’s manual • Service Center list The following Lionel marks may be used throughout this instruction manual and are protected under law. All rights reserved. Lionel ® , TrainMaster ®...
-
Page 3: Table Of Contents
Table of contents Wiring the Auto Dealership Installing the automobiles Operating the Auto Dealership Controlling the accessory in the Command Control environment Replacing the lamps 9-10 Notes... -
Page 4: Wiring The Auto Dealership
Auto Dealership operates best at 12 to 18 volts (AC). Power this accessory through a separate power supply or through track power by using a Lionel Lockon (available separately, 6-62900) or a FasTrack Accessory Power Wire (available separately, 6-12053). To make the proper connections, the wire must be stripped back 1/8”... -
Page 5: Installing The Automobiles
Installing the automobiles lace the three automobiles on the dealership platforms, inserting the two posts on the underside on the cars into the rings on the platforms. The yellow convertible is placed on the turntable closest to the fire hydrant, and the red pick-up truck is placed on the other turntable. -
Page 6: Controlling The Accessory In The Command Control Environment
Controlling the accessory in the Command Control environment or operation in the TrainMaster Command Control environment, you may choose to wire this accessory with an SC-2 Switch and Accessory Controller (available separately, 6-22980) or the Accessory Switch Controller (available separately, 6-14182). Refer to these manuals for additional information. - Page 7 Controlling the accessory in the Command Control environment (continued) SC-2 wiring and operation hree wires (not included) are needed to connect the accessory to the SC-2 Switch and Accessory Controller and a separate accessory transformer. Refer to Figure 3. 1. Attach one wire to the transformer Common/Ground/U terminal and connect it to the accessory COMM (common) position on the SC-2.
-
Page 8: Controlling The Accessory In The Command Control Environment
Controlling the accessory in the Command Control environment (continued) Accessory Switch Controller wiring and operation hree wires (not included) are needed to connect the accessory to the Accessory Switch Controller (ASC) and a separate accessory transformer. Refer to Figure 4. 1. -
Page 9: Replacing The Lamps
Auto Dealership accessory is illuminated by several fuse-style lamps (Lionel part no. 630-2998-300). During the course of normal operations, these lamps may require replacement. Replacement lamps are available at your authorized Lionel Service Center or from Lionel Service. Caution! We recommend wearing safety glasses when replacing the lamps. -
Page 10: Replacing The Lamps
Replacing the lamps (continued) Dealership sign Refer to Figure 6 to replace the lamp inside the dealership sign. 1. Remove the two screws from the base of the dealership sign. 2. Lift away the sign and separate it so that the hinged panel on the bottom swings down, revealing the fuse-style lamp. -
Page 11: Notes
Notes... -
Page 12: Warranty Information
Lionel L.L.C. or an authorized Lionel L.L.C. Service Center, together with proof of original purchase will, at the option of Lionel L.L.C., be repaired or replaced, without charge for parts or labor. In the event the defective product cannot be repaired, and a replacement is not available, a refund of the original purchase price will be granted.
Need help?
Do you have a question about the Ford Auto Dealership and is the answer not in the manual?
Questions and answers