Lionel FasTrack Owner's Manual
  1. Manuals
  2. Brands
  3. Lionel Manuals
  4. Toy
  5. Fastrack
  6. Owner's manual

Lionel FasTrack Owner's Manual

Operating track section
Hide thumbs Also See for FasTrack:
Table of Contents

Advertisement

Quick Links

Download this manual
71-2054-250
6/12
Operating
Track Section
Owner's Manual
Do not activate the central magnet for more than ten seconds at a
Caution!
time. Operating for over ten seconds may cause the track to overheat
and damage the track section and your layout.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FasTrack and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lionel FasTrack

Summary of Contents for Lionel FasTrack

  • Page 1 71-2054-250 6/12 Operating Track Section Owner’s Manual Do not activate the central magnet for more than ten seconds at a Caution! time. Operating for over ten seconds may cause the track to overheat and damage the track section and your layout.
  • Page 2 Operating the control rails Connecting the controller Connecting the track section to an accessory power supply Limited Warranty/Lionel Service The following Lionel marks are used throughout this Owner’s Manual and are protected under law. All rights reserved. Lionel , LEGACY...

  • Page 3: Joining The Track Sections

    Joining the track sections ith interlocking roadbed and large rail tabs, each FasTrack track section connects securely. Refer to Figures 1 and 2 as you connect the Operating Track section. 1. Line up your two sections of track. 2. Insert the rail tabs into the openings at the ends of the corresponding rails.
  • Page 4 Placing the Operating Track near a loading platform f you are placing the Operating Track section in front of a loading platform or other operating section, you may need to detach the beveled roadbed one side or the other for clearance.
  • Page 5 Operating the central magnet ithout making any additional connections, your Operating Track is powered through track power. Be sure that your throttle is set to 10-12 volts (AC) to activate the magnet. To uncouple or operate your rolling stock, position the trigger disc over the central magnet, press the UNCOUPLE button on the controller, and the magnet will pull the trigger disc downward to release the coupler or activate the car.

  • Page 6: Connecting The Controller

    Operating the control rails ome cars feature trucks with sliding contact shoes. As illustrated in Figure 5, position the car on the Operating Track section so that the contact shoes are positioned on the control rails. Press UNLOAD on the controller to activate the car. Coupler Sliding contact shoe Control rail...
  • Page 7 Connecting the track section to an accessory power supply or operation in the TrainMaster Command Control environment or to operate the track section when your layout is powered down, we recommend that you connect your Operating Track Section to a separate accessory power supply. This track section is designed to operate at 10-12 volts (AC).

  • Page 8: Product Description

    (or copy) from an Authorized Lionel Retailer*, will at the discretion of Lionel LLC, be repaired or replaced, without charge for parts or labor. In the event the defective product cannot be repaired, and a suitable replacement is not available, Lionel will offer to replace the product with a comparable model (determined by Lionel LLC), if available.

Table of Contents