JUKI DDL-5550N Handbook page 99

WHEN YOU PLACE ORDERS
MH1410
Needle gauge
2-needle 31.8mm (1-1/4")
2-needle 34.9mm (1-3/8")
2-needle 38.1mm (1-1/2")
4-needle 6.4mm 25.4mm 6.4mm
(1/4" 1" 1/4")
The needle gauge that falls within the range from
4.8mm to 50.8mm is available.
Gauges other than those shown in the above table are
available on a special order.
OPTIONS
Model Part No.
AK122 GAK-A22010B0
311-42565
311-43068
311-43167
311-41658
MAV-07236000
MAV-07237000
MAV-07240000
MH-1410 (September, 2003) 2/2
/
Code
A
B
C
D
Pneumatic auto-lifter
( JUKI: The SC-380 or a commercially available needle positioning motor is required.)
Needle cooler (pneumatic type): For MH-1410A
Needle cooler (pneumatic type): For MH-1410B, MH-1410C
Needle cooler (pneumatic type): For MH-1410D
Brakedown folder bracket (asm.)
Top roller (made of iron)
Top roller (made of urethane)
Top roller cover (for urethan roller)
/
Pneumatic auto-lifter Code
Not provided
provided AK122
Description
Cloth puller Code
Not provided
provided V072
✽
The V072 cannot be retrofitted to
your machine after the setup.
Designate one when placing
order for the machine.