JUKI DDL-5550N Handbook page 183

Automatic Pocket Welting Machine
APW-194N
(Without flap type)
APW-195N
(Flap sewing type)
APW-196N
(Slant pocket sewing type)
● Productivity is increased by equipping the machine with a sewing
speed capability of 2,500rpm.
● With its improved material-clamping force during jumping and its
newly adopted fluorocarbon resin coated binder that provides
smoother material feed, the machine can reliably feed garment
bodies and welting patches made of slippery materials to the sewing
position. The result is beautifully finished seams with no slippage
between the garment fabric and welting patch.
● The machine also retains data on ten different patterns, including
data on stitching length, stacker operation, etc.
up to five combined patterns can be executed.
the machine offers higher productivity in welting on semi-custom-
made garments under one-pattern-one-garment sewing system.
● The machine offers improved welting capabilities and is compactly
designed to allow efficient use in limited production spaces.
● APW-194N
The corner knife intervals can be automatically and accurately
adjusted simply by setting a sewing length on the operation panel,
ensuring that welts are finished with consistent quality at all times.
● APW-195N, APW-196N
When attaching flaps, the flap sensor detects the flap length for the
accurate adjustment of the sewing length and corner knife intervals.
Since the machine produces welts of consistent quality regardless of
the welting length, it can be widely used for the continuous sewing
of welts of different lengths.
SPECIFICATIONS
Model name
Sewing speed
Regular stitching
Stitch
Safety stitching
length Fastening
stitching
Back-tack stitching
Kinds of welts
Sewing length (welt length)
Number of patterns that can be
stored in memory
Cycle sewing
Needle gauge
Needle (at the time of delivery)
Needle bar stroke
Thread
Hook
Machine head
Thread take-up
Lubrication
Lubricating oil
Cloth feed system
Bobbin thread remaining amount
detecting device
Power consumption
Compressed air and air consumption
Total weight
Dimensions (excluding the stacker)
Height of table
Cycle sewing with
With this feature,
APW-194N
Without flap type
Parallel double-welt, parallel single-
welt, parallel variant double-welt
(without flaps)
Needle gauge 8 12mm: 35 180mm, Needle gauge 14mm or more: 50 180mm
By using the corresponding optional device, sewing length can be set to 18mm or more.
However, for the sewing length of 21mm or less, neither the center knife nor the corner knife can be used.
Possible (max. 5 different patterns can be combined)
ORGAN Mt 190 (#16) #16 #18
SCHMETZ 190R (Nm100) Nm100 Nm110
34.4mm
Vertical-axis full-rotary 1.6 fold-capacity hook
2-needle, lockstitch machine with center knife
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
200kg
● APW-196N
The machine is provided as standard with a turret-
type set of seven pairs of corner knives that can be
quickly selected and switched over in a single-motion.
Sewing of welts requiring different cutting angles and
depths can be easily set to respond to the pattern
invoked on the operation panel.
APW-195N
Flap sewing type
Normal 2,500rpm (1,000 2,500rpm)
Standard: 2.0mm (2.0 3.4mm)
Standard: 1.0mm (0.5 1.5mm)
Standard: 2.0mm (1.0 3.4mm)
Parallel double-welt, parallel single-
welt, parallel variant double-welt
(with/without flaps)
10 patterns
8, 10, 12, 14, 16, 18, 20mm
SPUN #50
Slide type
By an oiler (machine head and hook)
By a servomotor drive
Provided as standard
500W
2
0.5MPa (5.0kgf/cm ), 40N /min
735mm (W) 1,250mm (D) 1,200mm (H)
820mm
APW-194N, 195N, 196N (September, 2003) 1/4
APW-196N
APW-196N
Slant pocket sewing type
Parallel double-welt, parallel single-
welt, slant double-welt, slant single-
welt, trapezoidal stitching
(with/without flaps)
ORGAN DP 17 (#16) #16 #18
SCHMETZ SY3335 (Nm100) Nm100 Nm110
33.4mm
2-needle, lockstitch machine
with organized split needle bar and
center knife
220kg
13