JUKI DDL-5550N Handbook page 136

● The machine is provided as standard with as many as 30 stitch patterns for buttonholing.
qSquare wRound eRadial square
!1 S emilunar !2 R ound square
@1 S quare straight @2 S quare taper
bartacking bartacking
OPERATION PANEL (You can choose operation panel.)
STANDARD PANEL
● All kinds of data can be entered on or selected
from the operation panel.
● Various data, such as pattern numbers and
stitch shapes are indicated on the LCD section
with easy-to-understand pictographs.
LBH-1790 (September, 2003) 2/4
rRadial tRadial straight
bartacking
!3 S emilunar !4 S emilunar straight !5 S emilunar taper
square bartacking bartacking
@3 R adial @4 R adial round @5 S emilunar
semilunar
● A large color LCD touch panel has been adopted for the display.
displays that allow the operator to understand operating procedures.
● The IP-200A panel can be connected to a personal computer and can store data
on SmartMedia.
machines installed in a factory or among remote factories.
● The IP-200A panel has been provided with a process improvement supporting
feature through the indication of the operational state of the sewing machine,
yRadial taper uEyelet square
bartacking
!6 E yelet !7 E yelet round !8 S quare radial
semilunar
@6 S emilunar @7 B artacking
radial round
This allows data to be exchanged or shared among sewing
iEyelet radial oEyelet straight
bartacking
!9 S quare
semilunar
@8 B artacking, @9 B artacking,
right cut left cut
IP-200A
and a maintenance and
management feature for indicating
the needle changing timing and
cleaning timing.
Communication screen
SmartMedia card
!0 E yelet taper
bartacking
@0 S quare round
#0 B artacking,
center cut
It gives clear
Connected to a
personal computer