JUKI DDL-5550N Handbook page 15

1-needle, Bottom and Variable Top-feed Lockstitch Machine
DLU-5490N
DLU-5490N-7
(with automatic thread trimmer)
● The walking foot provides stable feed at all times, assuring high quality.
It also eliminates the need for proficiency.
● The top-feed motion ideally synchronized with the bottom-feed motion
to uniformly feed the upper and lower cloths, assuring attractive stitches
and uniform gathering stitches.
products.
● The maximum top-feed amount is 8mm.
been increased to assure stable gathering stitches.
SPECIFICATIONS
Model name
Max. sewing speed
Max. stitch length
Max. top-feed amount
Needle bar stroke
Lift of the presser foot
Needle (at the time of delivery)
Hook
Lubrication
Lubricating oil
Automatic reverse feed function
Power requirement
Power consumption
Weight
OPTIONS
Model Part No. Description
AK85 Auto-lifter
Remaining bobbin
AE-4 GAE-040000A0
thread detector
ED-2 Material edge sensor
PF-6 Partial shirring device
112-43763 Micro-lifter (asm.)
To retrofit the AE-4 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
Remaining bobbin thread detector (AE-4)
This leads to a higher value of finished
The top-feed amount has
DLU-5490N
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Machine head: 30kg
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn
the operator not to press on the front part of the foot pedal. With this function, the operator
doesn't have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates
the thread trimmer. This enhances productivity by allowing the operator to conduct sewing
work without running to look out for missing stitches.
The partial shirring device permits very easy shirring.
This device can be installed on the back of the faceplate. It is very convenient for frequent use.
4,500rpm
5mm
8mm
30.7mm
By hand: 5.5mm, By knee: 13mm
DB 1 (#14), For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
Automatic
Single-phase 100 120V, 200 240V
3-phase 200 240V
Feature
Material edge sensor (ED-2)
DLU-5490N-7-WB/CP-160A
DLU-5490N-7
Provided as standard
650VA
Total weight: 83kg
DLU-5490N, 5490N-7 (September, 2003) 1/2
1