JUKI DDL-5550N Handbook page 42

Dry-head, High-speed, Overlock / Safety Stitch Machine
MO-6100D Series
● The needle bar, feed and looper mechanisms require no oiling.
This means they do not splash oil, thereby leaving no oil stains on
the sewing material, and thus contributing to upgraded quality.
● The driving section of the machine, except for the needle bar, feed
and looper mechanisms is installed in a forced oiling block.
This block is completely sealed to prevent the leakage of oil.
● Stain-removing work or re-sewing work resulting from oil stains is
eliminated.
● The machine does not need periodical oiling or used-oil disposal,
which markedly improves maintainability.
● Anti-material-slip type
MO-6114D- -30P, MO-6116D-
The sewing machine is fully equipped with adjusting devices and
provisions to effectively prevent puckering of difficult-to-sew
materials or new-generation materials.
produce beautifully finished high-quality seams without conducting
difficult adjustments.
SPECIFICATIONS
Model name
Stitch type
Stitch style in the U.S.A.
Max. sewing speed
Stitch length
Needle gauge (mm)
Overedging width (mm)
Bottom differential feed ratio
Needle bar stroke
Inclination angle of the needle
Needle mechanism
Needle
Max. lift of the presser foot
Max. presser foot pressure
Stitch adjusting method
Differential-feed adjusting method
Weight of the machine head
Lubrication
Needle cooler
Needle thread heat remover
Micro-lifter
SUBCLASS MACHINE LIST
Materials
Seams Model No.
■ 1-needle overlock
● For runstitching in general fabric
MO-6104D-0D4-40H
MO-6104D-0E4-40H
MO-6104D-0D6-40H
M H
MO-6104D-0E6-40H
MO-6104D-0F4-40H
MO-6104D-0F6-40H
-30P
The operator is able to
MO-6104D
1-needle overlock
504
3.2, 4.0, 4.8
For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6)
24.5mm (anti-material-slip type), 25.5mm (upper looper extra high throw type)
Number
Number Number Needle Overedging
of of gauge width (mm) feed dog
rows
needles threads (mm)
1 3 3.2
1 3 4.0
1 3 3.2
1 3 4.0
1 3 4.8
1 3 4.8
MO-6114D
2-needle overlock
514
6,000rpm
0.8 4mm
2.0, 2.4
2.0, 3.2, 4.0, 4.8
20°
Needle bar method and upper/lower bushing
DC 27 (excluding some subclass model)
7mm (excluding some subclass model)
63.7N (6.5kg)
By push-button
By lever (with micro-adjustment)
28kg
No lubrication
Option
Option
Provided as standard
Presser
of Stitch lifting
Bottom
length differential- amount
Needle system
(mm) (mm)
feed ratio
2 4 1:0.7 1: 2 7 DC 27 #11
2 4 1:0.7 1: 2 7 DC 27 #11
3 4 1:0.7 1:2 7 DC 27 #11
3 4 1: 0.7 1:2 7 DC 27 #11
2 4 1:0.7 1: 2 7 DC 27 #11
3 4 1:0.7 1: 2 7 DC 27 #11
MO-6114D
MO-6116D
Safety stitching
516
1.5 4mm
2.0, 3.2, 4.8
3.2, 4.0, 4.8
Remarks
Max.
sewing
speed
(rpm)
6,000
6,000
6,000
Upper looper extra
high throw type
6,000
6,000
6,000
MO-6100D Series (September, 2003) 1/3
3