JUKI DDL-5550N Handbook page 194

ELECTRONIC-STOP MOTOR/
CONTROL BOX EC-10B
●
The EC-10B enables the sewing machine to perform
thread trimming, stop with its needle up/down,
perform automatic reverse feed stitching at sewing start
and sewing end, and perform one-touch reverse feed
stitching with a switch.
of reverse feed stitches can be specified.
●
A contactless electromagnetic coupling is adopted.
This means that the clutch disc does not require any
maintenance. Furthermore, cooling efficiency is
enhanced, there by preventing the motor from running
at very hot temperatures.
●
In addition to the EC-10B's error-identification and signal
input/output checking modes, the machine features a
new resistor pack system for identification of sewing
machine used for improved maintainability.
OPERATION PANEL CP-160 (OPTION)
●
Along with its standard functions, the operation panel
offers users a bobbin thread counter for higher
efficiency and pattern sewing.
layer stitching, constant-dimension sewing, and
rectangle stitching.
●
The easy-to-read operation panel facilitates function
selection and easy input of sewing data such as the
number of stitches.
● 1-needle, lockstitch machine: CP-160A
● LH-3100 series, LZ-2280N series: CP-160B
●
The optional ED-2 material edge sensor can be attached
to the operation panel.
(for 1-needle, lockstitch machine)
SC-910, SC-380, EC-10B (September, 2003) 4/5
Needless to say, the number
EC-10B
Functions such as multi-
CP-160A, CP-160B
OPERATION PANEL SPECIFICATIONS
No. Function
1 Automatic thread trimmer
2 Automatic back tack function
3 Wiper
Soft-start
4
5 Auto-lifter
Support for sewing machine for
6
standing use
7 Stop with needle up/down
8 Normal stop with needle up
9 Normal stop with needle down
Automatic back tack stitching at
10
sewing start
11 Automatic stitching at sewing end
12 Back tack pattern switch
13 Max speed limitation variable resistor
14 Thread trimming prohibition switch
15 Needle up/down compensating switch
16 Double back tack switch for start
17 Double back tack switch for end
18 Overlapped stitching pattern switch
19 Constant-dimension stitching pattern
20 Programmable seam length
21 Bobbin thread counter
22 Material edge sensor
●
Specified inside the control box.
●
Operative when the machine is equipped with auto-lifter (AK83: optional).
●
Pedal unit (PK-70, or 71: optionally available) for standing work can be attached to
the sewing machine.
● Operative when the machine is equipped with a material edge sensor
(ED-2:optional). (for 1-needle, lock stitch machine)
EC-10B/CP-160
EC-10B
(optional)
(0 19
(0 15 stitches) stitches)