Panasonic KX-FPC135 Service Manual page 22

KX-FPC135 / KX-FPC141
1.14.6. THE RECORDING PAPER
Letter or legal size recording paper can be loaded. The paper tray can hold up to 150 sheets of 75 g/m
paper. You may use 60 g/m
For best results, only use inkjet paper like Hammermill Jet Print. If you use other types of paper, the
print quality may be affected.
1
Fan the stack of paper to prevent a paper jam.
2
Pull the tension bar forward and hold open while
inserting the paper.
The height of the stack of the paper should not
exceed the upper limit on the paper tray,
otherwise the paper may jam or multi-feed.
The paper should not be over the tab.
If the paper is not inserted correctly, readjust the
paper or the paper may jam.
Correct
Note:
• • Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for
resumes.
• • Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause a paper jam.
• • Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or
wrinkled.
• • Avoid double-sided printing.
• • Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.
• • Do not reinsert the ejected paper into the recording paper exit.
• • Some paper only accept print on onr side. Try using the other side of paper when you are not happy with the print quality.
2 to 90 g/m 2 (16 lb. to 24 lb.) paper.
Incorrect
Stack of
paper
Paper tray
R
22
2 (20 lb.)
Upper
limit
Tab
Tension bar