Panasonic KX-FPC135 Service Manual page 136

KX-FPC135 / KX-FPC141
Ref. No. 6 HOW TO REMOVE THE ANALOG, DIGITAL AND POWER SUPPLY BOARDS AND AC INLET
Procedure
1 6
1) Remove the CHARGELEAD and ANTENNA
2) Remove the 4 screws
3) Remove the ANALOG BOARD.
4) Disconnect the 7 CONNECTORs-A.
5) Remove the 3 screws
6) Remove the DIGITAL BOARD.
7) Remove the 2 screws
8) Remove the screw
9) Disconnect the CONNECTOR-B and
the CONNECTOR-C.
10) Remove the POWER SUPPLY BOARD.
11) Remove the AC INLET.
.
A
.
B
.
C
CONNECTOR-A
.
D
B
CONNECTOR-A
DIGITAL BOARD
A
A
B
CHARGE LEAD
D
B
C
136
CAUTION:
A When removing the
A
ANTENNA LEAD, be sure
to pull it straight forword.
Do not distortit for cefully.
ANALOG BOARD
ANTENNA LEAD
AC INLET
CONNECTOR-C
CONNECTOR-B
C
POWER SUPPLY BOARD