Panasonic KX-FPC135 Service Manual page 132

KX-FPC135 / KX-FPC141
Ref. No. 2
HOW TO REMOVE THE OPERATION PANEL BLOCK
Procedure
1 2
1) Unhook all the connectors connecting
the main cabinet with the OPERATION
PANEL BLOCK.
2) Push the COVER OPEN BUTTON to open
the OPERATION PANEL BLOCK.
3) Tilt the unit vertically so that its left side
faces on a flat surface like a table. While
holding down the grey-shaded ARM as
illustrated in Fig. A
and unlatch the ARM as illustrated in
Fig. A 2 .
4) Pull out both sides of the arms (in the
direction of the arrow shown in Fig. B).
5) Remove the OPERATION PANEL BLOCK.
OPERATION
PANEL BLOCK
Fig. A
Fig. B
Taping Position (1)
View (B)
OPERATION PANEL
BLOCK
Taping Position (2)
1 , insert a screwdriver
OPERATION PANEL
BLOCK
Bend two bunches of harnesses
in parallel.
OK
OPENING
NG
Do not let harnesses overlap
each other.
View (B)
OK
NG
ARM
OK
View (C)
CUTOUT
Tie harnesses to the ARM with
tape tightly without making a slack.
132
NG
CUTOUT
Do not let harnesses hang over
the CUTOUT and the OPENING.
Slack
Tie harnesses to the ARM with
tape tightly without making a slack.
NG
OPENING
Do not let harnesses hang over
the CUTOUT and the OPENING.
View (C)
NG
OK
Stack
ARM
COVER OPEN BUTTON
Be sure not to let harnesses
get caught between the COVER
and the cabinet during the instal-
lation.
Fig. B