Names And Functions Of Indications On Remote Controller - Toshiba RAS-18N3KV-E Service Manual

9-4-3. Names and Functions of Indications on Remote Controller

[Display]
All indications, except for the clock time indicator, are displayed by pushing the
1
Transmission mark
This transmission mark
controller transmits signals to the indoor unit.
2
Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control, : Cool,
3
Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4
FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW +
HIGH ) can be shown.
Indicates AUTO when the operating mode is either
AUTO or : Dry.
5
TIMER and clock time indicator
The time setting for timer operation or the clock time
is indicated.
The current time is always indicated except during
TIMER operation.
6
Hi POWER indicator
Indicates when the Hi POWER operation starts.
Push the Hi-POWER button to start and push it
again to stop the operation.
9
1
10
11
6
indicates when the remote
: Dry, : Heat)
, MED , MED +
3
7
(PRESET) indicator
Flashes for 3 seconds when the PRESET button is
pushed during operation.
The
button for more than 3 seconds while the mark is
flashing.
Push another button to turn off the mark.
8
ECO indicator
Indicates when the ECO is in activated.
Push the ECO button to start and push it again to
stop operation.
9
A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display.
,
(When the remote controller setting is "A", there is
no indication at this position.)
10
Comfort sleep
Indicates when comfort sleep is activaled.
Push comfort sleep button to select.
11
Quiet
Indicates when quiet is activated.
Push quiet button to start and push it again to stop
operation.
12
One-Touch
Indicates when one touch comfort is activated.
Push one-touch button to start the operation.
13
Swing
Indicates when louver is swing.
Push swing button to start the swing operation and
push it again to stop the swing operation.
12
– –
47
FILE NO. SVM-12071
button.
mark is shown when holding down the
2
13
5
8
7
4