Self-Cleaning Function - Toshiba RAS-18N3KV-E Service Manual

Item
13. Self-Cleaning
function
Unit now performing cooling or dry operation
Only timer indicator lights, and Self-Cleaning operation starts
• During Self-Cleaning operations:
The louver opens slightly. The indoor fan oper-
ates continuously at a speed of 500 rpm.
Self-Cleaning operation times
Cooling: Auto (cooling) Dry
Heating: Auto (heating)
Auto (fan only)
Shutdown
• To stop an ongoing Self-Cleaning operation at any time
Push the start/stop button on the remote controller twice during the Self-Cleaning operation.
(After pushing the button for the first time, push it for the second time without delay
(within 10 minutes).)
Operation flow and applicable data, etc.
Push "STOP" button
Time set now elapses
Operation stops
1. Purpose
The Self-Cleaning operation is to mini-
mize the growth of mold, bacteria etc. by
running the fan and drying so as to keep
the inside of the air conditioner clean.
Self-Cleaning operation
When the cooling or dry operation shuts
down, the unit automatically starts the
Self- Cleaning operation which is then
performed for the specified period based
on duration of the operation which was
performed prior to the shutdown, after
which the Self-Cleaning operation stops.
(The Self-Cleaning operation is not
performed after a heating operation.)
2. Operation
1) When the stop signal from the remote
2) The period of the Self-Cleaning
3) After the Self-Cleaning operation has
Operation time Self-Cleaning operation time
No Self-Cleaning operation
Up to 10 minutes
performed (0 minutes)
10 minutes or longer 30 minutes
No Self-Cleaning operation performed
– –
38
FILE NO. SVM-12071
Description
controller or timer-off function is
received, only the timer indicator light.
operation is determined by the duration
of the operation performed prior to the
reception of the stop code.
been performed for the specified
period, the unit stops operating.