Vetta V100 User Manual page 25

SETUP: TEMPERATURE UNITS
A highlighted thermometer icon indicates that
the computer is in the Temperature Setup
screen mode. The flashing "F" indicates
Fahrenheit. To choose temperature readings
that are displayed in the Fahrenheit scale, press
Button #1 to select it and advance. To select the
Celsius scale, press Button #2 to scroll to a
flashing "C". Then press Button #1 to select and
advance.
SETUP: CLOCK
The V100 clock displays time in either a 12 or 24
hour format. A "PM" indicator appears only in
the 12hr format. To select a format and set the
current time, proceed as follows:
Use Button #2 to toggle between the
Step 1:
two time formats (the numbers will
flash).
Step 2: Press Button #1 to select the desired
time format and advance to the Clock
Setup screen with the left hours digits
flashing.
Step 3: To set the current time, press Button #2
to advance the flashing digit, then press
Button #1 to select it and advance to
the next flashing digit.
Step 4: Repeat this procedure for each digit
until the correct time is set in hours and
minutes, then press Button #1 again to
select and advance. Note: Although
there is only one clock time, either time
format–12 or 24 hour–can be set for
bikes I and II.