Technical Problems; General Problems - Kenwood KDW12SL3A User Manual

Technical problems

Problem
The dishwasher
does not start.
The drain pump is
not working
properly.

General problems

Problem
Detergent residue is
left in the dispenser
at the end of the
programme.
The detergent
dispenser lid cannot
be closed properly.
Knocking noise in
the wash cabinet.
Smearing appears
on glassware and
cutlery.
Kenwood KDW12SL3A_IB_100924_Zell.indd 31
Possible Causes
The door is not
properly closed.
The unit is not
connected to the
mains.
The unit is not
switched on.
Fault code E4 - The
anti-flooding system
has operated.
Possible Causes
The detergent
dispenser was still
damp when
detergent was
added.
Clogged detergent
residue is blocking
the catch.
A spray arm is
knocking against an
item in a basket.
The rinse aid
dosage is set too
high.
Remedy
Close the door
firmly.
Insert the plug to
the mains.
Press the "on"
button and select a
programme.
• Disconnect from
the mains.
• Disconnect the
water inlet.
• Call a qualified
technician.
Remedy
Make sure the
dispenser is dry
before adding
detergent.
Clean the catch.
Interrupt the
programme, and
rearrange the items
which are
obstructing the
spray arm. See the
section "loading the
diswasher".
Adjust the dial of
the rinse aid
dispenser to a lower
setting.
GB-31
24/09/2010 10:39 AM