Page 1
Dishwasher KDW4TTSL DSG Retail Limited is responsible for after sales service. If you have a query about the product please contact our product support line 0844 561 6263 (Currys) and 08700 118 117 (Pixmania). Kenwood KDW4TTSL_IB_GB_090828.in1 1 28/08/09 12:02:35 PM...
Kenwood dishwasher safety information disposal of the dishwasher before operating 14~17 to open the door to close the door items not suitable for use in the dishwasher adding the detergent adding of rinse aid...
Page 3
10~11 accessories control panel overview 12~13 maintenance after prolonged periods of non-operation troubleshooting guide 26-28 fault codes technical problems general problems 7-8 specifications GB-3 Kenwood KDW4TTSL_IB_GB_090828.in3 3 28/08/09 12:02:35 PM...
Kenwood dishwasher before using your Kenwood appliance ● Read these instructions carefully and retain for future reference. ● Remove all packaging labels. Please dispose of them properly. before calling for service ● Refer to Troubleshooting Tips section. This will help you to solve some general problems by yourself.
● Only use the appliance for its intended domestic use. The company responsible for this product, DSG Retail Limited, will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions. GB-5 Kenwood KDW4TTSL_IB_GB_090828.in5 5 28/08/09 12:02:35 PM...
Page 6
● Do not place any heavy objects on the open door. The appliance could tip. ● When loading items to be washed: 1) Locate sharp items so that they will not damage the door seal; GB-6 Kenwood KDW4TTSL_IB_GB_090828.in6 6 28/08/09 12:02:36 PM...
Page 7
● If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard. ● Remove the door to the washing compartment when removing an old dishwasher from service or discarding GB-7 Kenwood KDW4TTSL_IB_GB_090828.in7 7 28/08/09 12:02:36 PM...
● Please ensure that it presents no danger to children while being stored for disposal. GB-8 Kenwood KDW4TTSL_IB_GB_090828.in8 8 28/08/09 12:02:36 PM...
● Please dispose of the plastic wrappings and bags safely and keep out of the reach of babies and young children. GB-9 Kenwood KDW4TTSL_IB_GB_090828.in9 9 28/08/09 12:02:36 PM...
60ml (approx) detergent measuring spoon x 1 Instruction Manual X 1 Installation Guide X 1 1 full spoon = 0g (approx.) part number part number part number part number 673006200004 673002200079 675005900855 675005900742 GB-11 Kenwood KDW4TTSL_IB_GB_090828.in11 11 28/08/09 12:02:46 PM...
The “High temperature” indicator will illuminate on the LCD display when the water temperature is higher than 50°C. Always take care when opening, loading and unloading the dishwasher when this indicator is illuminated. GB-13 Kenwood KDW4TTSL_IB_GB_090828.in13 13 28/08/09 12:02:49 PM...
Plastic items (e.g. tupperware) which are not heat resistant may melt or lose shape due to high temperatures in the dishwasher. • Copper, brass, tin and aluminium items may discolour or become matt. GB-14 Kenwood KDW4TTSL_IB_GB_090828.in14 14 28/08/09 12:02:49 PM...
The marking in- dicates the dosing amount, which is approximately 0g. (Fig 1) Close the lid firmly so that it clicks open door open door into place. detergent slot GB-15 Kenwood KDW4TTSL_IB_GB_090828.in15 15 28/08/09 12:02:51 PM...
You can judge the amount of rinse aid by checking the rinse aid indicator right next to the reservoir’s cap. When the indicator is black, it means it is full. When it is clear, it means it is almost empty. GB-16 Kenwood KDW4TTSL_IB_GB_090828.in16 16 28/08/09 12:02:53 PM...
The salt indicator light will cease to illu- minate within a few days, depending on how quickly the salt dissolves. GB-17 Kenwood KDW4TTSL_IB_GB_090828.in17 17 28/08/09 12:02:54 PM...
CAUTION: Do not wash items soiled with ash, sand, wax, lubricating grease or paint in the dishwasher. Ash does not dissolve and can distribute in the dishwasher. Wax, sand, lubricating grease and paint can cause damage to the dishwasher. GB-18 Kenwood KDW4TTSL_IB_GB_090828.in18 18 28/08/09 12:02:56 PM...
Cutlery Basket hinged cup rack raise upwards To make room for taller items in the dishwasher basket, raise the cup rack upwards. (Fig 4) You can then lean the tall glasses against it. GB-19 Kenwood KDW4TTSL_IB_GB_090828.in19 19 28/08/09 12:03:00 PM...
Do not let any items extend through the bottom of baskets. (Fig ) To avoid the risk of injury, please load your knives and forks with handles up- wards. Do not hold them by their sharp edges. (Fig 3) GB-0 Kenwood KDW4TTSL_IB_GB_090828.in20 20 28/08/09 12:03:03 PM...
Press ON/OFF button again to restart the unit. You can then press the required new programme button and press pause/ start button again. The unit will start the new washing cycle shortly. GB-1 Kenwood KDW4TTSL_IB_GB_090828.in21 21 28/08/09 12:03:03 PM...
The “High temperature” indicator will illuminate on the LCD display when the water temperature is higher than 50°C. Always take care when opening, loading and unloading the dishwasher when this indicator is illuminated. GB- Kenwood KDW4TTSL_IB_GB_090828.in22 22 28/08/09 12:03:03 PM...
Follow the steps below to clean the filters in the wash cabinet. lift the entire filtering system • Ensure the dishwasher is switched off. • Lift the entire filtering system. (Fig GB-3 Kenwood KDW4TTSL_IB_GB_090828.in23 23 28/08/09 12:03:04 PM...
(Fig 1) • Use a pointed object, e.g. a cocktail stick, to loosen food particles in the spray arms’ jets. NOTE: Do not attempt to remove the spray arms. GB-4 Kenwood KDW4TTSL_IB_GB_090828.in24 24 28/08/09 12:03:06 PM...
Disconnect the unit from the water inlet and drain. Use a suitable re- ceptacal to catch the water. Open the door slightly to prevent unpleasant smells building up in the compartment. Ensure the washing compartment of the dishwasher is clean. GB-5 Kenwood KDW4TTSL_IB_GB_090828.in25 25 28/08/09 12:03:06 PM...
The float switch is broken or PCB is faulty E4 & E5 The wire terminal connected to the float switch is loose or broken. GB-6 Kenwood KDW4TTSL_IB_GB_090828.in26 26 28/08/09 12:03:07 PM...
See section “loading the diswasher”. Smearing appears on The rinse aid dosage is set Adjust the dial of the rinse glassware and cutlery. too high. aid dispenser to a lower setting. GB-7 Kenwood KDW4TTSL_IB_GB_090828.in27 27 28/08/09 12:03:07 PM...
Page 28
Change your detergent. have not been com- the detergent used is pletely removed. too low. Forgot to pre-rinse or Pre-rinse or remove the remove the stains with stains with napkin prior napkin prior washing. washing. GB-8 Kenwood KDW4TTSL_IB_GB_090828.in28 28 28/08/09 12:03:07 PM...
Capacity: 4 Place Settings Water Pressure Required: 0.03 - 1.00MPa Power Consumption: 180W Rated Voltage: 30V/50Hz Because we continually strive to improve our products we may change specifications and designs without prior notice. GB-9 Kenwood KDW4TTSL_IB_GB_090828.in29 29 28/08/09 12:03:07 PM...
Page 30
If you have a query about the product please contact our product support line 0844 561 6263 (Currys) and 08700 118 117 (Pixmania). DSG Retail • 200 The Campus • Marylands Avenue • Hemel Hempstead • Herts • HP2 7TG GB-30 Kenwood KDW4TTSL_IB_GB_090828.in30 30 28/08/09 12:03:08 PM...
Need help?
Do you have a question about the KDW4TTSL and is the answer not in the manual?
Questions and answers