Cleaning After Use; External Care; Door And Door Seals; Control Panel - Kenwood KDW12SL3A User Manual

cleaning after use

external care

the door and the door seal
• Clean the door seals regularly with a soft damp cloth to remove food
deposits.
• When the dishwasher is being loaded, food and drink residues may
drip onto the sides of the dishwasher door. These surfaces are
outside the wash cabinet and are not accessed by water from the
spray arms. Any deposits should be wiped off before the door is
closed.
the control panel
• If cleaning is required, the control panel should be wiped with a soft
damp cloth ONLY.
ATTENTION: To avoid penetration of water into the door lock and
electrical components, do not use a spray cleaner of any kind.
Never use abrasive cleaners or scouring pads on the outer surfaces
because they may scratch the finish. Some paper towels may also
scratch or leave marks on the surface.

internal care

filtering system

The filtering system in the base of the wash cabinet captures large
particles of suds solution. Build up of these particles may cause the
filters to block. Check the condition of the filters regularly and clean
them if necessary under running water.
Follow the steps below to clean the
filters in the wash cabinet.
• Ensure the dishwasher is switched
off.
• Unscrew the coarse filter, and gently
lift it out. (Fig 1)
Kenwood KDW12SL3A_IB_100924_Zell.indd 27
1
GB-27
24/09/2010 10:39 AM