Adding Of Rinse Aid - Kenwood KDW12SL3A User Manual

adding of rinse aid

Rinse aid helps to ensure water does
not cling and leave marks on crockery
during the drying phase and helps
crockery dry faster after it has been
washed. Only pour rinse aid that is
for domestic dishwashers into the
reservoir. This model is designed to
use liquid rinse aids only.
Please follow the steps below to pour
the rinse aid into the storage
reservoir, and the amount will
dispense automatically.
1. Turn the cap and open as indicated
in Fig 1.
2. When the cap open marking is
aligned (Fig 2a), you may lift the
cap up (Fig 2b).
3. Pour the rinse aid until the level
indicator turns completely black in
colour and close the cap. (Fig 3)
4. Be careful not to overfill the
reservoir. Wipe up any spills. The
approximate volume of the rinse
aid reservoir is 110ml.
NOTE: If the water hardness in your area is soft, you may not need
rinse aid as it may cause white film to develop on your
dishes.
Rinse aid warning light will illuminate when
the reservoir is running out of rinse
aid and requires refilling.
Alternatively, you can judge the amount of rinse aid by checking the
rinse aid indicator right next to the reservoir's cap. When the
indicator is black, it means it is full. When it is clear, it means it is
almost empty.
GB-16
Kenwood KDW12SL3A_IB_100924_Zell.indd 16
1
rinse aid indicator
open
2a
2b
3
rinse aid warning light
24/09/2010 10:39 AM