- After removing the packing, check to make sure that the appli- ance is not damaged. If in doubt, contact a qualified professional. - The dishwasher must only be used by adults for the washing of household dishes and cooking utensils.
Close-up View (Interior) A Cup Rack B Upper Rack C Rack Height Adjustor D Top Spray Arm E Lower Rack F Bottom Spray Arm Technical characteristics Width Depth Height Capacity Mains water pressure Power voltage Total absorber power G Washing Filter H Turbo Dry-fan Detergent and Rinse Aid Dispenser J Salt Container Cap...
Salt Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table" .The detergent dispenser is located on the inside panel the door.
Loading the Dishwasher Before placing the dishes in the dishwasher, remove the larger food debris to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed.
Setting The Start Delay Time Open the door of the dishwasher partially. If the "J" button is pressed (see, Close-up View" Control Panel"). The start time for the wash cycle can be delayed for 2,4 or 6 hours.
Wash Cycle Table Cycle Cycle Selection Information Very dirty dishes, pots and pans. (Not to be used with deli- cate items) Heavy Duty Normal dirty dishes, pots and pans. Stan- dard daily cycle. Normal Wash (IEC-EN50242) Normal dirty dishes, pots and pans without dried on residue.
Energy Saving Tips -It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the hold cycle.
Troubleshooting It may occur that the dishwasher does not function or does not function properly. Before calling for assistance, Iet us see what can be done first: have you forgotten to press one of the buttons or to perform an essential operation?
Levelling the Appliance Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making it level. In any case, the appliance should not be inclined more than 2˚. If the appli- ance is level, it will help ensure proper performance.