Hints And Tips; Fault Codes; Technical Problems - Kenwood KID60S18 Installation Instructions Manual

hints and tips

• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to Hints and Tips to solve some general problems
by yourself.

fault codes

codes
F1 Water overflow warning
F2 Waste water in the machine
cannot be discharged
F3 Continuous water input
F5 Inadequate water supply
F6 Faulty heater sensor
F7 Overheating (temperature in the
machine is too high)
F8 Heater error
F9 Divisor position error
FE Faulty electronic card

technical problems

problem
The dishwasher does not start.
The drain pump is not
working properly.
* Images are for reference only. Please refer to your individual model for details.
36
Kenwood Integrated Diswasher KID60S18 Manual.indd 36
possible causes
possible causes
The door is not properly closed.
The unit is not connected to
the mains.
The unit is not switched on.
The anti-flooding system
has operated.
remedy
• Turn the power to the machine off and close the tap.
• Contact service.
• Water discharge hose is clogged.
• The filters might be clogged.
• Power off-on your machine, then press and hold
down the P button for 3 seconds.
• If the error continues, contact service.
• Close the tap.
• Contact service.
• Make sure the water input tap is totally open and
that there is no water cut.
• Close the water input tap, separate the water
input hose from the tap and clean the filter at the
connection end of the hose.
• Restart your machine, contact service if the error
continues.
• Contact service.
• Contact service.
• Contact service.
• Contact service.
• Contact service.
Close the door firmly.
Insert the plug to the mains.
Press the
select a programme.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
remedy
ON/OFF button and
07/12/2018 12:18