Maintenance After A Prolonged Period Of Non-Operation; Hints And Tips; Technical Problems - Kenwood KDW60W15 Installation Instructions Manual

maintenance after a prolonged period of non-operation

If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any
residual water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.

hints and tips

• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to the "Technical Problems" and "General
Problems" sections to solve some general problems by yourself.

technical problems

problem
Dishwasher does not start.
E1
E4
30
possible causes
The door is not properly
closed.
The unit is not connected to
the mains socket.
The unit is not switched on.
Water tap is not turned on.
Low water pressure
(<0.04 MPa)
Flow meter is broken.
The wire terminals which
connect the flow meter are
loose.
The tank is leaking.
The hose is leaking.
The float switch is broken or
PCB is faulty.
remedy
Close the door firmly.
Connect the mains plug to the mains
socket.
Press the button and select a
programme.
Turn on the water tap.
Turn on the water tap and ensure it is
in full position.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.