Table of Contents
Advertisement
Check, cancel and change programmes
A
Disengage the timer mode.
When "#" lights on the front display panel
Press # (TIMER), then press DVD 1.
When "
" lights on the front display panel
Press DVD 1.
When "SAT#" lights on the front display panel
Press SAT# on the unit, then press DVD 1.
B
Access Programme Check screen.
Press PROG/CHECK.
To return to the previous
screen after you check the
programme, press PROG/
CHECK again.
To cancel the programme
Press rt repeatedly to
select a programme to be
cancelled, then press &.
C
Access the programme screen.
Press rt to select the programme, then press ENTER.
D
Change a programme.
Change the settings of the desired recording options as
required.
Refer to steps D – I in "Manual Timer Programming"
(
pg. 58).
E
Complete timer correction.
Press PROG/CHECK.
The previous screen resumes.
F
Engage the unit's timer mode.
For VIDEO Plus+ or Manual Timer Programming
Press # (TIMER).
For On-Disc Timer Programming
Press DVD 1.
For Automatic Satellite Programme recording
Press SAT# on the unit for 2 seconds or more.
Programme's information on the front display panel
You can check the details of the programmes even when the
power is turned off. (It is necessary that the Power Save mode
(
pg. 95, "POWER SAVE") is disengaged or the unit is not
in timer standby mode.) However, it is not possible to cancel
or change the programme's setting.
A Press PROG/CHECK.
"NEW PROG" or "P-1" (if 8 programmes have already
been set) appears.
B Press rt repeatedly until the desired programme
number ("P-1" to "P-8") appears, then press ENTER.
C Press e.
Each time you press e, the indication changes as follows
(the settings in parentheses are examples):
Date ("DATE 08.03SU") ] Start time ("ON 11:00") ] Stop
time ("OFF 11:30") ] Channel ("PR 1") ] Weekly/Daily
("MO-FR DAILY") ] Programme number ("P-1") and
Recording speed (SP) ] (Back to the beginning)
D Press PROG/CHECK to complete checking.
The normal display resumes.
63
Advertisement
Table of Contents
