Table of Contents
Advertisement
RECORDING
Basic Recording
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
ATTENTION:
It is not possible to record programmes on a DVD-R disc
which has already been finalised.
A
Load a disc.
A Press x to open the disc tray.
B Place a recordable disc on the disc tray.
For details, refer to "Placing a Disc" (
C Press x to close the disc tray.
B
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
pg. 10).
C
Set the recording speed.
Press REC MODE repeatedly until the desired recording
speed appears.
Each time you press REC MODE, the recording speed changes
as follows:
XP ] SP ] LP ] EP ] FR60–FR360* ] (Back to the
beginning)
* The value is selectable from 1 to 6 hours in 5-min. increment by
pressing w e repeatedly after selecting "FR60–FR360". To change
the value in 30-min. increments, press and hold w e .
For details on the recording speed, see page 54.
D
Start recording.
Press and hold 7, then press 4 on the remote control, or
press 7 on the unit.
E
Pause recording.
Press 9.
To resume recording, press 4.
F
Stop recording.
Press 8.
It takes about 10 seconds to end the writing session when
you stop recording.
NOTES:
It is recommended to format a DVD-RAM disc before use if
you use the disc on this unit for the first time.
When using a brand-new DVD-RW disc, format the disc either
in VR mode or in Video mode. (
DVD-RW disc")
You can record up to 99 programmes and 999 play lists on
each disc.
Some programmes can only be recorded one time.
When recording is started, an index of the first part of
recording is automatically recorded (
Database DVD Navi"). To record a satellite programmes, refer
to page 65. To delete the index, refer to page 71.
Recording sometimes may stop or cannot be performed even if
there is enough available capacity remaining on the disc.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (ITR) (
pg. 54) or timer recording (
58), the recording will resume automatically when power is
restored to the unit unless the unit's memory backup has
expired.
53
pg. 106, "Format a
pg. 66, "Library
pg. 56,
Advertisement
Table of Contents
