JVC DR-M1SLB Instructions Manual page 57

E
Set the following recording options as
required.
A Press w e to select the desired option.
B Press rt to select the desired setting, then press
ENTER.
"REC MODE" ( pg. 54, "Recording Speed") (
"Free Rate Function"), "VPS/PDC" (
Recording"), "DAILY/WEEKLY" (
Rec Function"), "NAME" (
Name"), and "STOP" (To advance/go back the stop time
by 30 minutes, press and hold rt).
VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this unit.
F
Access the confirmation screen.
Press ENTER.
G
Complete timer programming.
Press ENTER.
To programme another timer, repeat steps B – G.
If "PROGRAM OVERLAPPED" appears on the TV screen, see
"When programmes overlap each other" (
H
Engage the unit's timer mode.
Press # (TIMER). The unit turns off automatically and
"#" appears on the front display panel.
To disengage the timer mode, press # (TIMER) again.
pg. 55,
pg. 59, "PDC
pg. 57, "Daily/Weekly
pg. 70, "Modify Programme
pg. 64).
NOTES:
There may be cases that VIDEO Plus+ programming timer
recording function prolongs the stop time of the programming.
When two successive programmes are recorded on a
DVD-RW disc with VIDEO Plus+ programming timer
recording function, the beginning of the second one may be
left off the recording.
VIDEO Plus+ Timer Programming is not possible on the discs
used exclusively for On-Disc Timer Programming.
If the copy limited programme is received during
timer-recording, the unit enters Record Pause mode.
Recording starts again if it is switched to a recordable
broadcast during the time you programmed.
Satellite Receiver Users
To timer-record a satellite broadcast using the VIDEO Plus+
system:
A Perform "Satellite Receiver Control Setting" on page 28.
B Perform "VIDEO Plus+
you cannot set "VPS/PDC" to "ON".
C Leave the satellite receiver's power on.
Daily/Weekly Rec Function
You can record programmes with one of the following weekly/
daily timer settings.
WEEKLY
Select to record a weekly programme.
MON–FRI
Select to record a daily programme from
Monday through Friday.
MON–SAT
Select to record a daily programme from
Monday through Saturday.
SUN–SAT
Select to record a daily programme from
Sunday through Saturday.
Timer Programming". In step E,
®
57