Pnp/Pci Configuration - Intel 815TM5 User Manual

Intel 815 Micro-ATX Mainboard
4.9

PNP/PCI CONFIGURATION

CMOS Setup Utility - Copyright (C) 1984 - 2000 Award Software
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
Reset Configuration Data : (Default setting: Disabled)
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system can not boot.
Resources Controlled by : (Default setting: Auto (ESCD))
The Award Plug and Play BIOS has the capacity to automatically configure all of the
boot and Plug and Play compatible devices.
absolutely nothing unless you are using a Plug and Play operating system such as
Windows  95. If you set this field to "manual" choose specific resources by going
into each of the sub menu that follows this field (a sub menu is preceded by a " Ø ").
The choice: Auto(ESCD), Manual.
IRQ Resources: (Default setting: " Press Enter ")
When resources selection field shown above is "manual", You can assign each
system interrupt a type, depending on the type of device using the interrupt
PCI/VGA Palette Snoop: (Default setting: "Disabled")
Some display cards are non-standard VGA card (such as graphics accelerator or
MPEG Card) which may not display color properly on your screen. "Enable" the
setting in this field may correct this problem. Please leave it "Disabled" as the
default setting shown above if you are using the normal display card.
PnP/PCI Configuration
: Disabled
: Auto (ESCD)
: Press Enter
: Disabled
4-21
AWARD BIOS SETUP
Item Help
Menu Level
Default is Disabled.
Select Enabled to
Reset Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
Installed a new add-on
And the system.
Reconfiguration has
Caused such a serious
Conflict that the OS
Cannot boot
However, this capability means
Ø