Set Supervisor Password - Intel 815TM5 User Manual

Intel 815 Micro-ATX Mainboard
4.13

SET SUPERVISOR PASSWORD

CMOS Setup Utility - Copyright (C) 1984 - 2000 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PNP/PCI Configuration
PC Health Status
ESC : Quit
F10 : Save & Exit Setup
The password entry in this field is different to the "Power On Function" mentioned in
Section 2-2 and Section 4-7. Those password settings are used to power on your PC
system, However, the "SUPERVISOR PASSWORD" will be used to check the authority
when power-on the PC system. The Supervisor Password will have different function
according to the "Security Option" setup in Section 4.5:
When "Setup" is selected in Security Option:
If you want to change the BIOS setting, you will have to key-in the Supervisor
Password so that you can start the BIOS setup program and change the system
setting..
When "System" is selected in Security Option:
When turn on the PC system, it will request you to enter the Password. Without the
correct password, the PC system will stop and the operation system will not be
loaded.
Time, Date, Hard Disk Type ...
4-25
AWARD BIOS SETUP
Frequency / Voltage Control
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
↑↓→← : Select Item