Download Print this page

Advertisement

Quick Links

Chapter 1 Package Contents
Your main board package contains the following items:
• One Intel 865 serial main board
• One 80-pin ultra DMA 66/100 IDE drive ribbon cable
• One 34- pin Floppy drive ribbon cable
• Software install CD
• One user's manual
Chapter 2 Introduction
Key Features:
-Chipset:
Intel 865GV MCH: Intel 865GV: ICH: Intel 8280 IEB
-CPU:
Supports Intel Pentium HT (Hyper Threading Technology) CPU
Supports Intel Pentium 4 (Cedar mill): LGA 775 CPU
Supports Intel Pentium D (Smithfield) LGA775CPU
Supports Intel Pentium D (Presler) LGA775
Supports Intel Pentium 4 (Prescott) LGA775CPU
Supports Intel Celeron D (Prescott) LGA775
Supports Intel Celeron D (Cedar mill) LGA775 CPU
Supports 533/800MHz HOST BUS Frequency
-Memory:
Supports DDR266/333/400 Double Channel Mode
Provides Two 184 pin DDR slots
-Supports 4X/8X Fast Write Protocol (1.5V only)
Supports AGP 3.0 compliant
-Built Intel Extreme 2 Graphics display
Integrated display function technologies without extend VGA card
Integrated 2D/3D Graphics Controller
-One floppy port support format 360K/720K/1.2M/1.44M/2.88M disk driver
-One serial port
-One parallel port supports EPP/ECP/SPP transfers
-Eight USB ports
-One PS/2 Keyboard port
INTEL 865 Main board
User's Manual

Advertisement

loading

Summary of Contents for Intel 865

  • Page 1 • One user’s manual Chapter 2 Introduction Key Features: -Chipset: Intel 865GV MCH: Intel 865GV: ICH: Intel 8280 IEB -CPU: Supports Intel Pentium HT (Hyper Threading Technology) CPU Supports Intel Pentium 4 (Cedar mill): LGA 775 CPU Supports Intel Pentium D (Smithfield) LGA775CPU...
  • Page 2 -One PS/2 mouse port -One GAME/MIDI port -One VGA port -One IRDA port -Two SATA ports -Sound onboard AC’97 2.2 specification compliant Supports six channel sound input (example Realtek ALC650) Supports 16 bit ADC (Analog Digital Converter) Supports multiple stereo input mixer Provides Mic In Line In Line Out jack -Built-in 10/100 Mbps LAN card (Optional) -Expansion slot:...
  • Page 3 AuJF_L_Out L_Out Back SATA: PIN Jumper setting SATA Function SATA2 Function Ground Ground RSATA_RXP1 RSATA_RXP2 RSATA_RXNI RSATA_RXN2 Ground Ground RSATA_TXP1 RSATA_TXP2 RSATA_TXP1 RSATA_TXP2 Ground Ground Expansion slot DDR1/DDR2 184PIN DDR MEMORY SLOT PCI1/PCI2 32 PIN PCI BUS expansion slots AGP8X AGP display expansion slots Socket 775 Socket 775 CPU slots...
  • Page 4 IDE1/IDE2 Primary/ Secondary IDE port SATA1/SATA2 SATA Port Floppy Disk Drive Connector port PW1/PW2 ATX Power Supply Connector Port CPU FAN/2 CPU/ System FAN port Wake-on-Lan Connector port IRDA Irda Infrared port Function port panel Power Supply LED Pin 1: Power Supply Anode; Pin3: Ground HDD LED Pin2: power supply Anode;...
  • Page 5 Push the latches on each side of the DIMM slot down. Align the memory module with the slot. The DIMM slots are keyed with notches and the DIMMs are keyed with cutouts so that they. Can only be installed correctly. Check that the cutouts on the DDIMM module edge connector match the notches in the DIMM slot.
  • Page 6: Vgadriver Setup

    1.1 Installation Directory The utility CD is supplied with that main board the connects contained in it are showed as below: Directory Driver INTEL\INF\ Intel chipset software Windows 9X Windows 2000/XP Windows NT4.0 SOUND\REALTEK\ Realtek AC’97 Audio driver Windows 9X Windows 2000/XP Windows NT4.0...
  • Page 7 12Mbps on USB1.1 to a fast 480Mbps on USB 2.0 driver setup can ran windows update in windows 200/XP by internet. 1.6 VGA Driver Setup Insert the driver CD, running driver software CD choose the directory \CD-ROM:\INTEL\VGA\865\ Select “Next” to continue Select “Next” to continue...
  • Page 8 Select “Finish” to continue 1.7 LAN driver setup RTL8100 LAN driver only supports Windows 9x, Windows 2000/XP already built in this driver. Chapter 6 BIOS Setup The BIOS Setup utility record settings and information of your computer, such as date and time, the type of hardware installed, and various configuration settings your computer applies those information to initialize all the components when booting up and basic function.
  • Page 9 6.3 Advance BIOS Features CPU L1&L2 Cache Leave these items enabled since all the processors that can be installed on this board have internal L2 cache memory First Boot Device when system boot-strap first time detect decive Second/ third boot device when system boot-strap first time detect device Boot other Device if you enable this item the system will also search for other boot devices if it fails to find an operating system from the first two locations.
  • Page 10 Setup select paralled port Default: 378/IRQ7 Paralled Port Mode Setup paralled port mode Default: SPP Game/Midi port Address Setup game/MIDI port address Default: 201/330 Midi Port IRQ Setup MIDI port IRQ Default: 10 6.6 Power Management Setup ACPI Function Setup if use ACPI function Default: Enabled Video off Method Setup video off method...
  • Page 11 If you highlight this item and press Enter, a dialog box appears that you can enter a supervisor password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password. There will be the second dialog box asking you to retype the password for confirmation.