Maintenance Tool - Oki MC760 Maintenance Manual

Oki Data CONFIDENTIAL

[Maintenance tool]

The required tools for replacing the PCB and the unit are shown in Table 4-1-1.
Table 4-1-1 Maintenance tools
No. Maintenance tools
No. 2-200
1
Magnetic driver
2 No. 3-100 Driver
3 No. 5-200 Driver
4 Digital multimeter
5 Combination pliers
Handy cleaner (the
6 type corresponds to
the toner)
7 E Ring pliers
USB memory device
8
(Note)
(Note) Refer to "7.1 FIRMWARE UPDATING" in the Software Guide according to
the conditions for USB memory device
Note! Use the specified cleaner corresponding to the toner. It may cause a fire
when using a general-purpose cleaner.
45376001TH Rev.1
Amount
Purpose Note
3 - 5mm
1
Screw
1
1
1
1
Refer to the
1
following note.
For E ring
1
detaching
Refer to "6.1
Removal and
CU/HDD Installation of
1
FW Update Boards/HDD"
in the Software
Guide.
The required tools for using the maintenance utility are shown in Table 4-1-2.
Table 4-1-2 required tools
No. Maintenance tools
Notebook
Please install
1
the maintenance
utility.
2 USB cable
Ethernet cable
3
(Cross cable)
4. Component replacement
Amount Purpose Note
Refer to the
chapter
1 5.2 for the
maintenance
utility.
1
1
72 /