Logging onto the 7403 Terminal Using AMT
After configuring the 7403 you should now be able to log into it from a browser on a
remote PC.
1. Determine the target 7403's IP address.
2. Open the browser on the PC.
3. Enter the IP address in the Address line. Include the 16992 port.
4.
Windows:
All
Programs Accessories
Start
Enter ipconfig and press [Enter]. The IP address is displayed.
Linux:
Switch Focus to the Instructions window.
Enter ipconfig and press [Enter]. The IP address (Inet adder) is displayed.
http://<IP Address>:16992
Note: The 16992 port number is fixed and cannot be changed.
The AMT logon screen will appear if you are successful. Select the Log
to log onto the terminal.
Chapter 5: Configuring AMT
Command
Prompt
5-9
On button