Daewoo DWC-LU1011 Service Manual page 40

2-2. Rinse Sequence
1) Water Supply Sequence
part
Water Level
Mid
① Only cold water supply in Rinse Sequence
② In last Rinse Sequence, use fabric conditioner by open water valves.
2) Re-Water Supply
① After 1 min in Rinse Sequence, check water level and work Re-Water Supply.
3) Rinse Sequence
part
Water
Water
Temp
Level
Cotton/Normal Cold
Synthetic Cold
Delicate/Hand
Cold
Wash
Intensive Cold
Quick20 Cold
Sports Wear Cold
Tun Clean Cold
4) Drain
① Before Drainage Sequence, Water Temp. is dropped by cold water supply.
② After Drainage Sequence, Drain Motor is still ON
5) Mid. Spin
① Mid Spin is performed to decide r.p.m. If it can't R-Spin while performs 20 times, pass to next
sequence.
② In Shoes Course, does not work B-Spin.
level height(mm)
225
Rinse Mid. Spin
Mid. Spin
Time r.p.m.
3min 4min mid
3min 4min mid
3min 4min weak
3min 4min strong
1min 2min mid
3min 4min mid
3min 4min weak
38 38
KHz etc
24.32 Rinse water level
MOTOR On/OFF (sec)
rpm. water supply
45 r.p.m 5/10
45 r.p.m 5/10
45 r.p.m X
45 r.p.m 5/10
45 r.p.m 5/10
45 r.p.m 5/10
45 r.p.m 5/10
rinse
10/5
10/5
10/5
10/5
10/5
10/5
10/5