HyperTerminal Setup Procedures
If using a serial console, follow these procedures to create a HyperTerminal session.
A. Launch HyperTerminal by going to Start > Programs > Accessories > Communica-
tions > HyperTerminal:
B. In the Connection Description dialog box, enter any session Name, and then click
OK to open the Connect To dialog box:
C. At the Connect using field, select the COM port assigned to the serial port on the
laptop (probably "COM1"), and then click OK to open the Properties dialog box, dis-
playing the Port Settings tab:
8
6 R3000iR Q
S
G
e
uick
taRt
uide