Mapping External Lus Individually (Add Lu); Add Lu Window - HP StorageWorks XP12000 User Manual

Mapping external LUs individually (Add LU)

This section describes mapping operations starting with the Add LU command. Use the Add LU
Select Paths (Figure
individually.
NOTE: Before mapping the external LU, ensure that no other applications (such as RAID Manager XP)
that use the command device are executing. Stop any applications that are executing.
Figure 41

Add LU window

• Vendor
External array's vendor.
• Product
External array's product name.
• Serial
External array's product serial number.
• WWN
World Wide Name of the external array port used for connecting to the local array.
• LUN
LU number of the external LU.
• Device
External LU's device name.
• Ex-Dev. info.
External array information. When the external array is an XP1024/XP128 or TagmaStore Workgroup
Modular Storage (WMS) array, an asterisk (*) appears.
• VMA
Information about the VMA setting of LUN Security XP Extension. If you mapped the external LU and
previously set the VMA of LUN Security XP Extension, an asterisk (*) appears. If LUN Security XP
Extension is not installed when you remap the volume, you cannot map the volume with the VMA
setting.
• Capacity
External LU's capacity in blocks.
• Characteristic
42), SSID (Figure 45), and Set SSID
CU:LDEV list
(Figure 46) panes for mapping external LUs
LDEV map
External Storage XP user guide
(Figure 41),
CU list
71