Canceling Alternate Path Definitions; Changing Alternate Paths; Path Setting Window, Shortcut Menu - HP StorageWorks XP12000 User Manual

4. Detailed information about the currently used path and alternate path appears in the Configured Paths
table, and paths that can be defined as alternate paths appear in the Available Paths table.
5. In the Configured Paths table, right-click the row of the path defined as the alternate path, and select
Priority Up
path's priority is raised, and the path is set as the currently used path.
Figure 51

Path Setting window, shortcut menu

6. Repeat the Priority Up command until the row of the selected path is displayed on the first line of the
Configured Path list and that row's Priority column changes to 1.
When the Priority column changes to 1, the path is set as the typically used one (primary path).
7. Click OK. The Path Setting window closes, and the LU Operation pane appears.
Selected rows appear in blue italics in the Device list. Specified contents appear in the Preset list. To
check details on intended operations, right-click the setting in the Preset list, and select Detail. To cancel
settings, right-click the setting in the Preset list, and select Delete.
8. Click Apply. A confirmation message appears.
9. Click OK. The change in the alternate path defined in the Path Setting window is applied to the local
array, and specified contents appear in the Device list.
If errors occur during alternate path operations, failed settings and error codes appear in the Preset list.
To check error messages, right-click the failed setting, and select Detail.

Canceling alternate path definitions

Use the Path Setting pane to cancel an alternate path definition.
1. Follow step 1
2. In the Configured Paths table, right-click the row of the alternate path, and select Delete.
The selected alternate path's definition is canceled, and detailed information about the path is deleted
from the Configured Paths table.
3. Follow step 6

Changing alternate paths

To change an alternate path, cancel the current alternate path, and then define another path as a new
alternate path.
88 Configuring external LUs
(Figure 51). The row for the selected path switches with the row above it. The alternate
to step 3 in "Defining alternate
to step 8 in "Defining alternate
paths" on page 87.
paths" on page 87.