Mapping Command Devices As Remote Command Devices - HP StorageWorks XP12000 User Manual

• Device name
NOTE:
column of the Device list. For the device names reported to the host, see
• The following are restrictions for mapping command devices as remote command devices.
Table 11 Restrictions on remote command devices
Item
Emulation type
Number of LDEVs in an external LU
IO Suppression mode
Cache mode
Minimum capacity
Maximum capacity
• External Storage XP's Discovery operation cannot identify remote command devices.
• You cannot execute I/Os to remote command devices.
• You cannot set command devices to disabled on remote command devices.
• You cannot set command devices' security on remote command devices.
• Do not set command devices' security on the external array side for command devices mapped as
remote command devices.
• You cannot create LUSE volumes using remote command devices.
• You cannot use Volume Manager to create CVs in remote command devices.
• Cache LUN XP is not available on remote command devices.

Mapping command devices as remote command devices

To map command devices in external arrays as remote command devices, see
(Add LU)" on page 70.
NOTE: Command devices that can be mapped as remote command devices are displayed on External
Storage XP's panes as shown in
When you select Discovery in the Device tree on the LU Operation pane, the external array's WWNs
appear. When you select an external array's WWN in the Device tree, information such as OPEN-V-CM
appears in the Device column of the Device list for command devices that can be mapped. Select a
command device that can be mapped, and follow the procedure in
page 70 to map it.
The device name reported to the host is the same as the one displayed in the Device
Table 10.
Restriction
OPEN-V
1
Disable
Disable
96,000 blocks (about 47 MB)
2 TB
Table 10.
"Mapping external LUs
"Mapping external LUs (Add
External Storage XP user guide 105
LU)" on