Setting the Image Folder Naming
Convention
Selecting the Folder Name
You can select the method for assigning the folder names for storing
images. The default setting is [Date].
The two digits of the [month] and [day] on which the picture was taken
are assigned as the folder name in the form of [xxx_MMDD]. [xxx] is
Date
a sequential number from 100 to 999. [MMDD] (month and day)
appears according to the display style set in [Date Adjust] (p.205).
(Example) 101_0125: for folders with pictures taken on January 25th
The folder name is assigned in the form of [xxxPENTX].
PENTX
(Example) 101PENTX
Set in [Folder Name] in the [R Set-up] menu (p.202).
Set-up
Guide display
Brightness Level
Video Out
USB Connection
Auto Power Off
Folder Name
Cancel
MENU
Selecting the File Number Setting
You can select the method for assigning the file number of an image when
saved to a new folder. Select O (On) or P (Off) for [File No.] in [Memory]
in the [A Rec. Mode] menu. (p.217)
The file number of the last image saved to the previous folder is saved
O (On)
and subsequent images are assigned sequential file numbers even if
a new folder is created.
The file number of the first image saved to a folder returns to 0001
P (Off)
each time a new folder is created for saving images.
When the number of storable images exceeds 500, captured images are divided into
folders of 500 images each. However, in Auto Bracket, images will be stored in the same
folder until shooting is completed, even if the number of images exceeds 500.
3sec
0
NTSC
P C
Date
PENTX
OK
OK
213
10